Ipsec vpn between 3005 and firebox 1000

Discussion in 'Cisco' started by John Strow, May 23, 2007.

  1. John Strow

    John Strow Guest

    Hi

    Has anyone successfully connected Cisco concentrator 3005 behind the pix and
    FireboxIII 1000 over IPsec VPN tunnel? Both sides have multiple internal
    subnets. We were able to establish tunnel but tunnel drops during the
    renegotiation phase for few seconds that come back again. Only one internal
    subnet from one side can communicate to respective subnet on other side. If
    we bring second tunnel (second subnet) on firebox side first one goes down

    We've also tried to connect firebox to pix directly without success

    Any help will be appreciate
     
    John Strow, May 23, 2007
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.