Interconnecting two pbx over CEoIP on Cisco 2610 and 2811

Discussion in 'Cisco' started by uchapahwa, Dec 15, 2006.

  1. uchapahwa

    uchapahwa Guest

    I have two pbx connected back to back and would like to implement CEoIP
    on these pbx connected over the Cisco 2610 and the 2811.I would like
    you guys to help me on how best i can connect them?,the configuration
    that i have to do as well as the software requirements?

    Thanks

    Uchapahwa
     
    uchapahwa, Dec 15, 2006
    #1
    1. Advertisements

  2. Well, the cisco docs would be a good starting point. Hopefully you
    have a 2610XM, since the non-XM 2610 isn't supported for the NM-CEM-4TE1..

    http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/ioh/nm/nm_cem.pdf
     
    Doug McIntyre, Dec 15, 2006
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.