IDSM-2 config

Discussion in 'Cisco' started by hopethisworks, Mar 20, 2006.

  1. does anyone know where I can find some examples of the use of the
    IDSM-2 blade version 5.1? Specfically how to force multiple vlans to
    be inspected using in-line vlan pairs mode. I've read everything I
    can find on the cisco web site, including the config docs. the stuff in
    those docs is really limited, and the only example i can find is one of
    how to upgrade the thing. we are using 802.1q to send multiple vlans
    over the same gig wan links, in addition to having multiple port based
    vlans defined.

    usually i can find an example of just about anything i want to do, or
    at least something that will give me a clue as to what i need to do,
    but this time i haven't found much.

    anyway, any examples of using this blade would be helpful. they are in
    6509's, not that it matters much.

    thanks
     
    hopethisworks, Mar 20, 2006
    #1
    1. Advertisements

  2. hopethisworks

    Merv Guest

    Merv, Mar 21, 2006
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.