Idle TCP session over Cisco PIX

Discussion in 'Cisco' started by Ilan, May 17, 2005.

  1. Ilan

    Ilan Guest

    Hello
    A TCP session with no keep-alive (in accordance to rfc1122),
    is closed by Cisco PIX firewall (routing mode, NAT).
    Increasing "timeout conn" seems problematic.
    How Cisco PIX should be cofigured to enable a spesific idle session?
    Ilan
     
    Ilan, May 17, 2005
    #1
    1. Advertisements

  2. :A TCP session with no keep-alive (in accordance to rfc1122),
    :is closed by Cisco PIX firewall (routing mode, NAT).
    :Increasing "timeout conn" seems problematic.
    :How Cisco PIX should be cofigured to enable a spesific idle session?

    cross-post, don't multi-post.

    See my answers in comp.protocols.tcp-ip or comp.security.firewalls...
    both saying "You can't do that... unless maybe you are using 7.0(1)".
     
    Walter Roberson, May 17, 2005
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.