I could NOT open "Protected EAP Properties" dialog box

Discussion in 'Wireless Networks' started by TSIS-SSO, Feb 19, 2010.


    TSIS-SSO Guest

    Hi, Sir
    I have this trouble, Help please.

    I could NOT open "Protected EAP Properties" dialog box in "authentication"

    Before that, i chose "Protected EAP (PEAP)" from drop-down list of "EAP
    type", then click Properties. But it have not any action, Could NOT open
    "Protected EAP Properties".

    * I had confirmed that wireless adapter works well when use Supplicant
    software to access WLAN.
    TSIS-SSO, Feb 19, 2010
    1. Advertisements


    TSIS-SSO Guest

    Adding Info:
    my OS is XP-SP3,
    TSIS-SSO, Feb 19, 2010
    1. Advertisements

  3. Hi
    Maybe this can Help, the Core differences between WEP, WPA, and WPA2 -
    From the weakest to the strongest, Wireless security capacity is.
    No Security
    Switching Off SSID (same has No Security. SSID can be easily sniffed even if
    it is Off)
    MAC Filtering______(Band Aid if nothing else is available, MAC number can be
    easily Spoofed).
    WEP64____(Easy, to "Break" by knowledgeable people).
    WEP128___(A little Harder, but "Hackable" too).
    The three above are Not considered safe.
    Safe Starts here at WPA.
    WPA-PSK__(Very Hard to Break).
    WPA-AES__(Not functionally Breakable)
    WPA2____ (Not functionally Breakable).
    Note 1: WPA-AES the the current entry level rendition of WPA2.
    Note 2: If you use WinXP bellow SP3 and did not updated it, you would have
    to download the WPA2 patch from Microsoft.
    The documentation of your Wireless devices (Wireless Router, and Wireless
    Computer's Card) should state the type of security that is available with
    your Wireless hardware.
    All devices MUST be set to the same security level using the same pass
    Therefore the security must be set according what ever is the best possible
    of one of the Wireless devices.
    I.e. even if most of your system might be capable to be configured to the
    max. with WPA2, but one device is only capable to be configured to max . of
    WEP, to whole system must be configured to WEP.
    If you need more good security and one device (like a Wireless card that can
    do WEP only) is holding better security for the whole Network, replace the
    device with a better one.
    Setting Wireless Security - http://www.ezlan.net/Wireless_Security.html
    Jack (MVP-Networking).
    Jack [MVP-Networking], Feb 27, 2010
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.