How to retrieve temperature value from Cisco 3270 wireless router.

Discussion in 'Cisco' started by Charles, Jun 12, 2007.

  1. Charles

    Charles Guest

    Cisco 3270 wireless has an onboard temperature sensor that alerts
    administrator if router board falls outside the temperature range of
    -40 to +203°F (-40 to 95°C). CISCO-ENVMON-MIB has been enabled on
    this wireless router, however, I can only retrieve the following snmp
    data points via snmpwalk:

    snmpwalk -v 2c -c public 192.168.0.176 1.3.6.1.4.1.9.9.13
    SNMPv2-SMI::enterprises.9.9.13.1.1.0 = INTEGER: 6
    SNMPv2-SMI::enterprises.9.9.13.1.3.1.2.1 = STRING: "Chassis"
    SNMPv2-SMI::enterprises.9.9.13.1.3.1.6.1 = INTEGER: 1
    SNMPv2-SMI::enterprises.9.9.13.2.1.0 = INTEGER: 1
    SNMPv2-SMI::enterprises.9.9.13.2.2.0 = INTEGER: 1
    SNMPv2-SMI::enterprises.9.9.13.2.3.0 = INTEGER: 1
    SNMPv2-SMI:: enterprises.9.9.13.2.4.0 = INTEGER: 1
    SNMPv2-SMI::enterprises.9.9.13.2.5.0 = INTEGER: 1
    SNMPv2-SMI::enterprises.9.9.13.2.6.0 = INTEGER: 1

    There is no data point to give the actual value of the chassis
    temperature.

    It would be highly appreciated for you to let me know:

    (1)Is it possible to get the actual value of the chassis temperature?
    (2)If possible, how can I retrieve the actual value of the chassis
    temperature?

    Thank you very much.
     
    Charles, Jun 12, 2007
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.