How to get Cisco Bridge MIB information using snmp v3

Discussion in 'Cisco' started by anuradhacb, Dec 13, 2007.

  1. anuradhacb

    anuradhacb Guest

    Hi,

    On cisco 3750 switch, as BRIDGE MIB is indexed on the vlan id, I am
    able to get all the entries on all vlans, when I do query with SNMP v1
    & v2c. As mentioed in the Cisco documentation, v1 & v2c queries were
    done by appending vlan number to the community string.

    But I am unable to do the queries using SNMP v3. Is anyone aware of
    how to get using v3.

    I also came to know that the vlan numbers should be sent as "contexts"
    in v3. Is this correct?? If so, how do we create contexts for the
    vlan.

    Thanking you in advance,
    Anu
     
    anuradhacb, Dec 13, 2007
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Standard Cisco MIB/OID For Port Duplex Information?

  2. SNMP MIB and OID string

  3. SNMP information -- MIB/OID

  4. How to access router security information using SNMP

  5. Content Switch snmp mib for DoS counter wanted

  6. MIB to clear virtual-interface via SNMP?

  7. Incomplete snmp Bridge MIB on 2970g

  8. BGP4-MIB CISCO-BGP4-MIB

Loading...