How do I messure entire traffic on a 6509 switch

Discussion in 'Cisco' started by R.B.P., May 31, 2004.

  1. R.B.P.

    R.B.P. Guest

    Hi

    We have som problems with a 6509 switch

    I therefore would like to messure the entire traffic the switch handle at a
    given time.

    I think MRTG might be an idea, but which OID do I use to messure the entire
    traffic at a given time ?




    BR

    R.B.P.
     
    R.B.P., May 31, 2004
    #1
    1. Advertisements

  2. R.B.P.

    AnyBody43 Guest


    A search on mibdepot.com for "systraffic" reveals:-
    (I just knew, sorry)

    cisco SCALAR v2 sysTraffic .1.3.6.1.4.1.9.5.1.1.8.0 CISCO-STACK-MIB
    CISCO-STACK-MIB.my
    2 cisco SCALAR v1 sysTraffic .1.3.6.1.4.1.9.5.1.1.8.0 CISCO-STACK-MIB
    CISCO-STACK-MIB-V1SMI.my
    3 cisco TABULAR v1 sysTrafficMeter .1.3.6.1.4.1.9.5.1.1.32.1.2
    CISCO-STACK-MIB CISCO-STACK-MIB-V1SMI.my
    4 cisco TABULAR v2 sysTrafficMeter .1.3.6.1.4.1.9.5.1.1.32.1.2
    CISCO-STACK-MIB CISCO-STACK-MIB.my
    5 cisco ENTRY v2 sysTrafficMeterEntry .1.3.6.1.4.1.9.5.1.1.32.1
    CISCO-STACK-MIB CISCO-STACK-MIB.my
    6 cisco ENTRY v1 sysTrafficMeterEntry .1.3.6.1.4.1.9.5.1.1.32.1 C
    ISCO-STACK-MIB CISCO-STACK-MIB-V1SMI.my
    7 cisco TABULAR v1 sysTrafficMeterPeak .1.3.6.1.4.1.9.5.1.1.32.1.3
    CISCO-STACK-MIB CISCO-STACK-MIB-V1SMI.my
    8 cisco TABULAR v2 sysTrafficMeterPeak .1.3.6.1.4.1.9.5.1.1.32.1.3
    CISCO-STACK-MIB CISCO-STACK-MIB.my
    9 cisco TABULAR v1 sysTrafficMeterPeakTime .1.3.6.1.4.1.9.5.1.1.32.1.4
    CISCO-STACK-MIB CISCO-STACK-MIB-V1SMI.my
    10 cisco TABULAR v2 sysTrafficMeterPeakTime
    ..1.3.6.1.4.1.9.5.1.1.32.1.4
    CISCO-STACK-MIB CISCO-STACK-MIB.my
    11 cisco TABLE v2 sysTrafficMeterTable .1.3.6.1.4.1.9.5.1.1.32
    CISCO-STACK-MIB CISCO-STACK-MIB.my
    12 cisco TABLE v1 sysTrafficMeterTable .1.3.6.1.4.1.9.5.1.1.32
    CISCO-STACK-MIB CISCO-STACK-MIB-V1SMI.my
    13 cisco TABULAR v1 sysTrafficMeterType .1.3.6.1.4.1.9.5.1.1.32.1.1
    CISCO-STACK-MIB CISCO-STACK-MIB-V1SMI.my
    14 cisco TABULAR v2 sysTrafficMeterType .1.3.6.1.4.1.9.5.1.1.32.1.1
    CISCO-STACK-MIB CISCO-STACK-MIB.my
    15 cisco SCALAR v2 sysTrafficMonitorHighWaterMark
    ..1.3.6.1.4.1.9.5.1.1.57.0 CISCO-STACK-MIB CISCO-STACK-MIB.my
    16 cisco SCALAR v1 sysTrafficMonitorHighWaterMark
    ..1.3.6.1.4.1.9.5.1.1.57.0 CISCO-STACK-MIB CISCO-STACK-MIB-V1SMI.my
    17 cisco SCALAR v2 sysTrafficPeak .1.3.6.1.4.1.9.5.1.1.19.0
    CISCO-STACK-MIB CISCO-STACK-MIB.my
    18 cisco SCALAR v1 sysTrafficPeak .1.3.6.1.4.1.9.5.1.1.19.0
    CISCO-STACK-MIB CISCO-STACK-MIB-V1SMI.my
    19 cisco SCALAR v2 sysTrafficPeakTime .1.3.6.1.4.1.9.5.1.1.20.0
    CISCO-STACK-MIB CISCO-STACK-MIB.my
    20 cisco SCALAR v1 sysTrafficPeakTime .1.3.6.1.4.1.9.5.1.1.20.0
    CISCO-STACK-MIB CISCO-STACK-MIB-V1SMI.my

    Try these out, they are from the 5000/5500 but may be relevant
    to the 6500.

    IIRC there were two distinct mib 'trees' for the 5000/5500.
    One was for the 5000 with it's single backplane and the
    other the 5500 with it's three.

    Let us know if you find anything useful. Cisco SNMP stuff
    often seems to be harder to figure out than it might be.
     
    AnyBody43, Jun 1, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.