How do I convert my second Router into an Access Point

Discussion in 'Wireless Networking' started by Rolf Schreiner, Feb 11, 2014.

  1. Hi everyone, February 11, 2014

    I would like to use my Sitecom router as an access point. Is this the way to do it?

    I am using Windows 7 Ultimate and I have a Ubee UVW-3200 cable Modem/Router.. On port 1, I connect a second Sitecom Wi-Wi Router AC1750 WLR-8100 connected to its WAN port.

    I would like my Sitecom Router to become an Access Point with the same (2.4GHz) SSID as the Ubee Modem/Router, so that I can "roam" throughout the house without losing signal. The 5.0 GHz Wi-Fi of the Sitecom AP should still be useable when within reach.

    Current configuration settings (Sitecom as Router):
    Ubee Router Sitecom Router

    LAN IP adres: 192.168.178.1 192.168.10.1
    DHCP Server: Enabled Enabled
    Ipv4 address: 192.168.178.10 192.168.178.10
    DHCP Status: No DHCP clients Show all clients
    2.4 GHz Radio: Disabled Enabled
    5.0 GHz Radio: N/A Enabled
    2.4 GHz - SSID: Ziggo5C5CC Sitecom0F7FF1
    2.4 GHz channel: Disabled Automatic
    5.0 GHz channel: N/A Automatic
    2.4 GHz security: WPA+PSK WPA+PSK
    2.4 GHz password Ubee's own PW Sitecom's own PW
    5.0 GHz - SSID: N/A Sitecom0F7FF2
    5.0 GHz security: N/A WPA+PSK
    5.0 GHz password: N/A Sitecom's own PW
    Network connection: LAN Port 1 WAN Port

    Proposed configuration settings (Sitecom as Access Point):
    Ubee Router Sitecom Access Point

    LAN IP address: 192.168.178.1 192.168.178.2
    DHCP Server: Enabled Disabled
    Ipv4 address: 192.168.178.10 N/A
    DHCP Status: Show all clients N/A
    2.4 GHz Radio: Enabled Enabled
    5.0 GHz Radio: N/A Enabled
    2.4 GHz - SSID: Ziggo5C5CC Ziggo5C5CC
    2.4 GHz channel: 1, 6, 11, or Auto 1, 6, 11, or Auto
    5.0 GHz channel: N/A Automatic
    2.4 GHz security: WPA+PSK WPA+PSK
    2.4 GHz - password: Ubee's own PW Ubee's own PW
    5.0 GHz SSID: N/A Sitecom0F7FF2
    5.0 GHz security: N/A WPA+PSK
    5.0 GHz password N/A Sitecom's own PW
    Network connection: LAN Port 1 LAN Port 1

    Questions:
    1. Will this configuration work as intended?
    2. Can I have the same 2.4 GHz SSID (Ziggo5C5CC) on my Ubee Router and my Sitecom AP?
    3. Will I still have cabled internet on my Sitecom AP?
    4. Will I still have Wi-Fi internet on 2.4GHz and 5.0 GHz of my Sitecom AP?
    5. With its DHCP disabled, can I still acces the Sitecom AP configuration page through my PC browser when using the Windows 7 TCP/IPv4 configuration of "obtaining an IP address automatically", or do I have to use the Windows 7 PC TCP/Ipv4 configuration of "use the following IP address:", and enter the new Sitecom LAN IP address of: 192.168.178.2?

    If I do not do things right, any suggestions would be greatly appreciated.

    Many Thanks,

    Rolf Schreiner
     
    Rolf Schreiner, Feb 11, 2014
    #1
    1. Advertisements

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
  1. yar
    Replies:
    4
    Views:
    3,203
    Juan Carlos \(El fortinero\)
    Sep 21, 2004
  2. RKay

    Can I convert a router to an access point?

    RKay, Jan 27, 2005, in forum: Wireless Networking
    Replies:
    4
    Views:
    24,005
  3. Mr. Mistery
    Replies:
    5
    Views:
    707
    Mr. Mistery
    Feb 8, 2004
  4. NW Technicals

    How to Covert Linksys WRTP54G router into Access Point

    NW Technicals, Aug 13, 2006, in forum: Wireless Networking
    Replies:
    3
    Views:
    2,059
    Jack \(MVP-Networking\).
    Aug 14, 2006
  5. EnglishRacing

    how do i change my access point to repeater

    EnglishRacing, Jan 30, 2007, in forum: Wireless Networking
    Replies:
    0
    Views:
    2,024
    EnglishRacing
    Jan 30, 2007
  6. Rock Gibbons
    Replies:
    2
    Views:
    878
    PC Tech Solutions
    Mar 21, 2007
  7. Ken
    Replies:
    5
    Views:
    761
    Charlie Russel - MVP
    Sep 16, 2008
  8. kendarak
    Replies:
    0
    Views:
    1,328
    kendarak
    Jul 12, 2009
Loading...