How do I block an IP address range on PIX?

Discussion in 'General Computer Support' started by iinken, Aug 23, 2008.

  1. iinken

    iinken

    Joined:
    Aug 23, 2008
    Messages:
    1
    Likes Received:
    0
    Location:
    Singapore
    Hi,

    I'm currently working with a PIX 515e Firewall, and I was just wondering, how do I block an internal IP address range from entering the DMZ interface? My inside interface has the IP address 10.0.0.1 with netmask 255.255.255.0 , while my internal users are all using 10.0.0.0/24 IP addresses. I'm supposed to block 10.0.0.128~254/24 from accessing the DMZ services.

    Any help would be appreciated.

    Thanks,
    Marcus
     
    iinken, Aug 23, 2008
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.