Help with jumper settings please

Discussion in 'Computer Support' started by MadHater, Sep 30, 2006.

  1. MadHater

    MadHater Guest

    I have a setup involving 3 hard disks and one dvd drive. My primary OS drive and secondary hard drive are on ide channel 1, with the dvd and third hard drive on ide channel 2

    What should the jumper settings be for the dvd and third HD? If the general rules apply, Master should be the drive at the topmost connection (That would be my DVD), while the slave would be the middle ide connection (third HD). But, would those jumper settings interfere with the primary drives on IDE channel 1?

    Thanks for your help.




    --------------= Posted using GrabIt =----------------
    ------= Binary Usenet downloading made easy =---------
    -= Get GrabIt for free from http://www.shemes.com/ =-
     
    MadHater, Sep 30, 2006
    #1
    1. Advertisements

  2. MadHater

    doS Guest

    what pc brand?
     
    doS, Sep 30, 2006
    #2
    1. Advertisements

  3. MadHater

    Yddap Guest

    No, but there may be a speed penalty when accessing HDD #3
    The layout you suggest is the best without involving extra IDE driver cards
    :)
     
    Yddap, Oct 1, 2006
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.