help with CISCO CP- 7940 IP PHONE to SIP

Discussion in 'General Computer Support' started by Mattuk2013, Mar 13, 2013.

  1. Mattuk2013

    Mattuk2013

    Joined:
    Mar 13, 2013
    Messages:
    1
    Likes Received:
    0
    Location:
    Axminster Devon
    Hello just bought a Cisco 7940 ip phone from ebay a few days ago it currently has app load ID P00308000100 and boot load id PC0303010100 i am trying to get it to work with my asterisk system that i have created in Virtual box using asterisk now 2..0.2 i don't know how to configure the phone to use Sip i have been looking on the net and youtube for easy steps to converting the phone over to use sip but with no luck. if anyone could help me it would be greatly appreciated.

    i don't have a Cisco smartnet account and don't have the sip firmware files for the phone the Mac is 0011920E1782
    the asterisk is on 192.168.101.15
    from what i see on the net its using SCCP firmware
     
    Mattuk2013, Mar 13, 2013
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.