help signal processing Data Acqusition Study using matlab.

Discussion in 'General Computer Support' started by jhazicalization, Sep 30, 2009.

  1. jhazicalization

    jhazicalization

    Joined:
    Sep 30, 2009
    Messages:
    1
    Likes Received:
    0
    Hi im new here.. can somebody help me on how to capture signal samples (e.g RF signal, telephone line signal, etc.) and convert it in digital data form that the matlab software understands. I only have a, 56K modem, a sound card and a TV card..Is there a software i can use to maximize this hardwares that i have? A yeah also for the serial parallel port? hope someone can help me.. thanks...
     
    Last edited: Sep 30, 2009
    jhazicalization, Sep 30, 2009
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Cisco VPN fails after suspend/resume and causes Matlab execution failures

  2. Matlab Help

  3. matlab

  4. Post-Processing RAW vs Post-Processing TIFF

  5. Help on auto conversion from Matlab to vhdl on filter design

  6. Digital signal processing

  7. No Signal and Signal 'Low'

  8. Signal is 'Low,' or 'No Signal'

Loading...