[HELP] Show Voice Port, and DSP question

Discussion in 'Cisco' started by root, Jul 21, 2004.

  1. root

    root Guest

    Have 2 option 11 nortel PBX's talking to each other through a cisco
    3640 and 2610 using NM-HDV modules with T1 VWIC cards.

    Was curious why on the 2610, when there is no activity, it shows some
    channels up and seized, as opposed to the 3640 that are all dorm and
    idle. When there is no voice activity.

    thanks

    -------
    Cisco2610#show voice port summary
    IN OUT
    PORT CH SIG-TYPE ADMIN OPER STATUS STATUS EC
    ====== == ============ ===== ==== ======== ======== ==
    1/0:0 01 e&m-wnk up dorm idle idle y
    1/0:0 02 e&m-wnk up dorm idle idle y
    1/0:0 03 e&m-wnk up dorm idle idle y
    1/0:0 04 e&m-wnk up dorm idle idle y
    1/0:0 05 e&m-wnk up dorm idle idle y
    1/0:0 06 e&m-wnk up up idle idle y
    1/0:0 07 e&m-wnk up dorm idle idle y
    1/0:0 08 e&m-wnk up dorm idle idle y
    1/0:0 09 e&m-wnk up dorm idle idle y
    1/0:0 10 e&m-wnk up dorm idle idle y
    1/0:0 11 e&m-wnk up dorm idle idle y
    1/0:0 12 e&m-wnk up up idle idle y
    1/0:0 13 e&m-wnk up dorm idle idle y
    1/0:0 14 e&m-wnk up dorm idle idle y
    1/0:0 15 e&m-wnk up dorm idle idle y
    1/0:0 16 e&m-wnk up dorm idle idle y
    1/0:0 17 e&m-wnk up dorm idle idle y
    1/0:0 18 e&m-wnk up up seized idle y
    1/0:0 19 e&m-wnk up dorm idle idle y
    1/0:0 20 e&m-wnk up dorm idle idle y
    1/0:0 21 e&m-wnk up dorm idle idle y
    1/0:0 22 e&m-wnk up dorm idle idle y
    1/0:0 23 e&m-wnk up dorm idle idle y
    1/0:0 24 e&m-wnk up up idle idle y

    c3640#show voice port summary
    IN OUT
    PORT CH SIG-TYPE ADMIN OPER STATUS STATUS EC
    ========= == ============ ===== ==== ======== ======== ==
    1/0:0 01 e&m-wnk up dorm idle idle y
    1/0:0 02 e&m-wnk up dorm idle idle y
    1/0:0 03 e&m-wnk up dorm idle idle y
    1/0:0 04 e&m-wnk up dorm idle idle y
    1/0:0 05 e&m-wnk up dorm idle idle y
    1/0:0 06 e&m-wnk up dorm idle idle y
    1/0:0 07 e&m-wnk up dorm idle idle y
    1/0:0 08 e&m-wnk up dorm idle idle y
    1/0:0 09 e&m-wnk up dorm idle idle y
    1/0:0 10 e&m-wnk up dorm idle idle y
    1/0:0 11 e&m-wnk up dorm idle idle y
    1/0:0 12 e&m-wnk up dorm idle idle y
    1/0:0 13 e&m-wnk up dorm idle idle y
    1/0:0 14 e&m-wnk up dorm idle idle y
    1/0:0 15 e&m-wnk up dorm idle idle y
    1/0:0 16 e&m-wnk up dorm idle idle y
    1/0:0 17 e&m-wnk up dorm idle idle y
    1/0:0 18 e&m-wnk up dorm idle idle y
    1/0:0 19 e&m-wnk up dorm idle idle y
    1/0:0 20 e&m-wnk up dorm idle idle y
    1/0:0 21 e&m-wnk up dorm idle idle y
    1/0:0 22 e&m-wnk up dorm idle idle y
    1/0:0 23 e&m-wnk up dorm idle idle y
    1/0:0 24 e&m-wnk up dorm idle idle y


    --------------------


    Also on the show voice dsp, it shows on the cisco 3640 that the dsp
    chips numbering is 10 thru 15 and the 2610 dsp number is 9 thru 14.
    According to: the NM-HDV data sheet
    http://www.mtmnet.com/PDF_FILES/Nm-HDV_DataSheet.pdf

    it shows when using 2 pvdm's in socket 0 and 1, that the range is 9 -
    14.

    Why is the 3640 showing it as 10-15 ?
     
    root, Jul 21, 2004
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.