HELP: ScanLogic USBIDE - USB Storage Device installation problem.

Discussion in 'Computer Support' started by Arawak, Aug 20, 2003.

  1. Arawak

    Arawak Guest

    I purchased a ScanLogic external 2.5" external HD enclosure
    (EasyConnections) and it has work fine over the past year but after a
    system crash, I have not been able to access the drive. I have tried
    to do so from both Desktop and Laptop. WinXP advises new device and
    tried to load the device driver but produces error message:
    Cannot start this hardware (Code 10).

    Any help or suggestion appreciated...I couldn't find any other driver
    online. If the drive's MBR or partition is damaged, how can I access
    the drive to correct the problem since Partition Magic 8.0 does not
    see this drive although it does recognize other USB drives.
    Any DOS based utility available to access USB devices on booting up?

    TIA
    Arawak
     
    Arawak, Aug 20, 2003
    #1
    1. Advertisements

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.