Help: MICRO ATX MS-6367 CMOS PROBLEMS!!

Discussion in 'Computer Support' started by Trevor, Jul 17, 2003.

  1. Trevor

    Trevor Guest

    Hello,

    I have a Micro ATX MS-6367 motherboard with 1300 AMD Duron processor
    and I am experiencing problems with the cmos. When I first put the
    system together I could not get the boot up screen to come up. The fan
    and HDD and power lights would come on but no boot up screen. But then
    I changed the cmos jumper to clear(pin 2,3)and I started the system
    and it booted up but it was acting like the cmos battery was dead. So
    I removed the jumper altogether and it does the same thing. It acts
    like the cmos battery is dead. I took the battery out to test and it
    tests good at 3v. It will not boot with the jumper on pins 1,2. I
    can't figure out what is wrong. Please help ASAP.

    Thanks,

    Trevor
     
    Trevor, Jul 17, 2003
    #1
    1. Advertisements

  2. Trevor

    Jj Guest

    (Trevor) wrote in
    Try in:
    alt.comp.periphs.mainboard.msi-microstar

    If you stared the computer with the jumper set in the clear position it may
    have damaged the motherboard - it says this in the manual.
     
    Jj, Jul 17, 2003
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.