Help Gigabyte GA7N400 Pro 2 MOBO

Discussion in 'Computer Support' started by BIGEYE, Nov 6, 2004.


    BIGEYE Guest

    Mobo has a pin header for front or rear audio. To enable front audio two
    jumpers have to be removed and a cable connected. If I connect front audio,
    will this disable the rear audio, or will both front and rear work.
    Also the cable connectors and mobo pins are marked differently. Appreciate
    if someone can advise the correct connections.
    The mobo pins are marked:
    Pin 1 Mic
    Pin 2 Gnd
    Pin 3 Ref
    Pin 4 Power
    Pin 5 Front Audio (R)
    Pin 6 Rear Audio (R)
    Pin 9 Front Audio (L)
    Pin 10 Rear Audio (R)

    The cable connectors are labelled:
    Mic -Bias
    Aud Gnd
    FPOut - L
    FPOut - R
    Ret - L
    Ret - R

    Appreciate any help.
    BIGEYE, Nov 6, 2004
    1. Advertisements


    Timpson Guest

    Have you looked here Pro.htm
    Timpson, Nov 6, 2004
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.