Frame-relay - CISCO, status deleted - PVC Issue

Discussion in 'Cisco' started by Sharrky, Oct 19, 2010.

  1. Sharrky

    Sharrky

    Joined:
    May 25, 2009
    Messages:
    2
    Likes Received:
    0
    Hi,
    Been pulling my hair out on this one!! :-x OK in my lab environment I have a hub (R1) & spoke (R2 and R3) network with a frame relay switch (R6). For some reason, I am seeing CISCO, status deleted on the spoke routers. This is not allowing me to PING. Here's a quick look at all the configurations;

    R6 - Frame Relay Switch

    interface Serial0
    no ip address
    encapsulation frame-relay
    logging event subif-link-status
    logging event dlci-status-change
    clock rate 56000
    no fair-queue
    no frame-relay inverse-arp
    frame-relay intf-type dce
    frame-relay route 122 interface Serial1 221
    frame-relay route 123 interface Serial2 321
    !
    interface Serial1
    no ip address
    encapsulation frame-relay
    logging event subif-link-status
    logging event dlci-status-change
    clock rate 56000
    no frame-relay inverse-arp
    frame-relay intf-type dce
    frame-relay route 221 interface Serial0 122
    !
    interface Serial2
    no ip address
    encapsulation frame-relay
    logging event subif-link-status
    logging event dlci-status-change
    clock rate 56000
    no frame-relay inverse-arp
    frame-relay intf-type dce
    frame-relay route 321 interface Serial0 123

    R6#show frame-relay route
    Input Intf Input Dlci Output Intf Output Dlci Status
    Serial0 122 Serial1 221 active
    Serial0 123 Serial2 321 active
    Serial1 221 Serial0 122 active
    Serial2 321 Serial0 123 active

    R1 - Hub

    R1#show run int serial 0/1
    Building configuration...

    Current configuration : 214 bytes
    !
    interface Serial0/1
    ip address 172.0.123.1 255.255.255.248
    encapsulation frame-relay
    frame-relay map ip 172.0.123.2 122 broadcast
    frame-relay map ip 172.0.123.3 123 broadcast
    no frame-relay inverse-arp
    end

    R1#show frame-relay map
    Serial0/1 (up): ip 172.0.123.2 dlci 122(0x7A,0x1CA0), static,
    broadcast,
    CISCO, status defined, active
    Serial0/1 (up): ip 172.0.123.3 dlci 123(0x7B,0x1CB0), static,
    broadcast,
    CISCO, status defined, active

    R1#show frame-relay pvc

    PVC Statistics for interface Serial0/1 (Frame Relay DTE)

    Active Inactive Deleted Static
    Local 2 0 0 0
    Switched 0 0 0 0
    Unused 0 0 0 0


    R2 - Spoke

    R2#show run interface serial 0/0

    Building configuration...

    Current configuration : 258 bytes
    !
    interface Serial0/0
    ip address 172.0.123.2 255.255.255.248
    encapsulation frame-relay
    fair-queue
    frame-relay map ip 172.0.123.1 221 broadcast
    frame-relay map ip 172.0.123.3 221 broadcast
    frame-relay interface-dlci 221
    no frame-relay inverse-arp
    end

    R2#show frame-relay map
    Serial0/0 (up): ip 172.0.123.1 dlci 221(0xDD,0x34D0), static,
    broadcast,
    CISCO, status deleted
    Serial0/0 (up): ip 172.0.123.3 dlci 221(0xDD,0x34D0), static,
    broadcast,
    CISCO, status deleted

    R2#show frame-relay pvc


    PVC Statistics for interface Serial0/0 (Frame Relay DTE)

    Active Inactive Deleted Static
    Local 0 0 1 0
    Switched 0 0 0 0
    Unused 1 0 0 0

    R3 - Spoke

    R3#show run int ser0/0

    Building configuration...

    Current configuration : 261 bytes
    !
    interface Serial0/0
    ip address 172.0.123.3 255.255.255.248
    encapsulation frame-relay
    no fair-queue
    frame-relay map ip 172.0.123.1 321 broadcast
    frame-relay map ip 172.0.123.2 321 broadcast
    frame-relay interface-dlci 321
    no frame-relay inverse-arp
    end

    R3#show frame-relay map
    Serial0/0 (up): ip 172.0.123.1 dlci 321(0x141,0x5010), static,
    broadcast,
    CISCO, status deleted
    Serial0/0 (up): ip 172.0.123.2 dlci 321(0x141,0x5010), static,
    broadcast,
    CISCO, status deleted

    R3#show frame-relay pvc

    PVC Statistics for interface Serial0/0 (Frame Relay DTE)

    Active Inactive Deleted Static
    Local 0 0 1 0
    Switched 0 0 0 0
    Unused 1 0 0 0

    Am I forgetting something?? :argh:


    Thanks

    DK
     
    Sharrky, Oct 19, 2010
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.