FastEthernet card not working in 12008 router

Discussion in 'Cisco' started by eduke, Nov 2, 2005.

  1. eduke

    eduke Guest

    I have Cisco router 12008. Here is the "sh ver" output:

    ****************************************************************************
    Cisco Internetwork Operating System Software
    IOS (tm) GS Software (GSR-P-M), Version 12.0(30)S4, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2005 by cisco Systems, Inc.
    Compiled Tue 04-Oct-05 14:52 by tinhuang
    Image text-base: 0x50010E80, data-base: 0x536F0000

    ROM: System Bootstrap, Version 11.2(17)GS2, [htseng 180] EARLY DEPLOYMENT
    RELEASE SOFTWARE (fc1)
    BOOTLDR: GS Software (GSR-P-M), Version 12.0(30)S4, RELEASE SOFTWARE (fc1)

    cisco 12008/GRP (R5000) processor (revision 0x05) with 262144K bytes of
    memory.
    R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache

    507K bytes of non-volatile configuration memory.

    20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
    8192K bytes of Flash internal SIMM (Sector size 256K).
    Configuration register is 0x2102

    WARNING: Old fab-loader in slot 1; use "upgrade fabric-downloader" to update
    WARNING: Old fab-loader in slot 2; use "upgrade fabric-downloader" to update
    WARNING: Old fab-loader in slot 3; use "upgrade fabric-downloader" to update
    WARNING: Old fab-loader in slot 5; use "upgrade fabric-downloader" to update
    WARNING: Old MBus agent ROM in some slots; use "upgrade mbus-agent-rom" to
    update
    ****************************************************************************

    Also there is in SLOT 5 8 Port Fast Ethernet Copper card. The problem is,
    this card is not working. It tries to power up but after IOS download (I
    mean all that startup procedure these cards do in order to work) it puts
    itself into WAIT. Here is the "sh diag 5" output:

    ****************************************************************************
    SLOT 5 (RP/LC 5 ): 8 Port Fast Ethernet Copper
    MAIN: type 46, 800-4543-03 rev A0
    Deviation: 0
    HW config: 0x01 SW key: 00-00-00
    PCA: 73-3683-05 rev A0 ver 3
    Design Release 1.0 S/N CAB04239U5R
    MBUS: MBUS Agent (1) 73-2146-07 rev B0 dev 0
    HW version 1.2 S/N CAB04239VOD
    Test hist: 0x00 RMA#: 00-00-00 RMA hist: 0x00
    DIAG: Test count: 0x00000000 Test results: 0x00000000
    FRU: Linecard/Module: 8FE-TX-RJ45-B=
    L3 Engine: 1 - Standard OC48 (2.5 Gbps)
    MBUS Agent Software version 1.100 (RAM) (ROM version is 2.33)
    ROM Monitor version 16.4
    Fabric Downloader version used 25.1 (ROM version is 24.5)
    Primary clock is CSC 0, Persistent LOS to slot 16 17 18 19 20
    Board State is Waiting to retry download after persistent failures (RTRY
    WAIT)
    Insertion time: 00:00:16 (2d23h ago)
    ****************************************************************************

    How can I make this card to work? Cards in slots 1, 2, and 3 work fine. Here
    is "sh diags summary" output:

    ****************************************************************************
    SLOT 0 (RP/LC 0 ): Route Processor
    SLOT 1 (RP/LC 1 ): 4 Port Packet Over SONET OC-3c/STM-1 Single Mode
    SLOT 2 (RP/LC 2 ): 1 Port Gigabit Ethernet
    SLOT 3 (RP/LC 3 ): 1 Port Gigabit Ethernet
    SLOT 5 (RP/LC 5 ): 8 Port Fast Ethernet Copper
    SLOT 16 (CSC 0 ): Clock Scheduler Card(8)
    SLOT 17 (CSC 1 ): Clock Scheduler Card(8)
    SLOT 18 (SFC 0 ): Switch Fabric Card(8)
    SLOT 19 (SFC 1 ): Switch Fabric Card(8)
    SLOT 20 (SFC 2 ): Switch Fabric Card(8)
    SLOT 26 (PS B1 ): AC Power Supply(8)
    ****************************************************************************

    Thanks for help

    Igor
     
    eduke, Nov 2, 2005
    #1
    1. Advertisements

  2. Hi Igor,

    You may wish to contact Reggie Grant at Cisco Repair.

    Toll Free: 877-549-2680 or 828-277-7272

    http://www.bradreese.com/cisco-big-iron-repair.htm

    Sincerely,

    Brad Reese
    BradReese.Com Cisco Repair Service Experts
    http://www.BradReese.Com
    1293 Hendersonville Road, Suite 17
    Asheville, North Carolina USA 28803
    USA & Canada: 877-549-2680
    International: 828-277-7272
     
    www.BradReese.Com, Dec 1, 2005
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.