Errors in IAS event log while trying to setup WPA2

Discussion in 'Wireless Networking' started by Starrett, Nov 5, 2008.

  1. Starrett

    Starrett Guest

    Hello Experts,

    I have a WindowsNT4.0 domain, Windows2003 IAS with self-signed cert., and a
    Cisco AP1242AG setup to use WPA2.
    I cannot seem to get a domain user to authenticate.
    I'm looking for some help to figure it out.
    I receive 2 EventID's in the System log on the IAS server, see below:
    Event Type: Warning
    Event Source: IAS
    Event Category: None
    Event ID: 2
    Date: 11/5/2008
    Time: 10:27:08 AM
    User: N/A
    Computer: AUTH01
    Description:
    User test was denied access.
    Fully-Qualified-User-Name = OURDOMAINHERE\test
    NAS-IP-Address = 172.16.17.228
    NAS-Identifier = ap
    Called-Station-Identifier = <not present>
    Calling-Station-Identifier = <not present>
    Client-Friendly-Name = AP01Bldg10Warehouse
    Client-IP-Address = 172.16.17.228
    NAS-Port-Type = Async
    NAS-Port = <not present>
    Proxy-Policy-Name = Use Windows authentication for all users
    Authentication-Provider = Windows
    Authentication-Server = <undetermined>
    Policy-Name = Connections to other access servers
    Authentication-Type = PAP
    EAP-Type = <undetermined>
    Reason-Code = 66
    Reason = The user attempted to use an authentication method that is not
    enabled on the matching remote access policy.
    For more information, see Help and Support Center at
    http://go.microsoft.com/fwlink/events.asp.
    Data: 0000: 00 00 00 00 ....

    Event Type: Error
    Event Source: IAS
    Event Category: None
    Event ID: 5052
    Date: 11/5/2008
    Time: 10:27:08 AM
    User: N/A
    Computer: AUTH01
    Description:
    There is no domain controller available for domain OURDOMAINHERE.
    For more information, see Help and Support Center at
    http://go.microsoft.com/fwlink/events.asp.
     
    Starrett, Nov 5, 2008
    #1
    1. Advertisements

  2. NAS-Port-Type = Async could be the problem. This post may help too.

    Event ID 2: Reason-Code = 668 posts - 2 authors - Last post: Mar 7
    Posted: Sun Apr 15, 2007 10:41 pm Post subject: Event ID 2:
    Reason-Code = 66 .... Before Event ID 2, the IAS server also lists this
    event ...
    www.chicagotech.net/netforums/viewtopic.php?t=664


    --
    Bob Lin, MS-MVP, MCSE & CNE
    Networking, Internet, Routing, VPN Troubleshooting on
    http://www.ChicagoTech.net
    How to Setup Windows, Network, VPN & Remote Access on
    http://www.HowToNetworking.com
     
    Robert L. \(MS-MVP\), Nov 5, 2008
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.