error while installing HWIC-1CE1T1-PRI V02 interface card

Dear Team,




I have Cisco 3845 router with Cisco IOS Software, 3800 Software (C3845-ADVENTERPRISEK9-M), Version 12.4(25d).
"flash:c3845-adventerprisek9-mz.124-25d"

I installed HWIC-1CE1T1-PRI V02 interface card, but it showing below error,


WIC Slot 2:
Unknown WAN daughter card
WIC module not supported/disabled in this slot
Hardware Revision : 0.0
Top Assy. Part Number : 800-34375-01
Part Number : 73-13313-01
Board Revision : B0
Deviation Number : 0
Fab Version : 05
PCB Serial Number : FOC17014PKQ
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Version Identifier : V02
Product (FRU) Number : HWIC-1CE1T1-PRI
CLEI Code : COUIAKJCAB
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 05 29 41 00 00 C0 46 03 20 00 86 47 01
0x10: 82 49 34 01 01 42 42 30 88 00 00 00 00 02 05 C1
0x20: 8B 46 4F 43 31 37 30 31 34 50 4B 51 03 00 81 00
0x30: 00 00 00 04 00 89 56 30 32 20 CB 8F 48 57 49 43
0x40: 2D 31 43 45 31 54 31 2D 50 52 49 C6 8A 43 4F 55
0x50: 49 41 4B 4A 43 41 42 D9 02 40 C1 FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF


Kindly suggest me asap.


Regards,



Sushant Redkar