Error in win XP Pro Corp W/Sp1 and Updates

Started getting the following: mstore.exe.version.10.0.2625 faulty module
unknown, version 0.0.0.0. fault address 0xbaabcd68.
And another one: 10000008e, parameter 1c0000005, parameter 2bf824100,
parameter 3f2143bf4, parameter 00000000
I hope that I copied these correctly, had to write them down and go to
another computer...
On the error page it tells me to go to
http://go.microsoft.com/fwlink/events.asp

There is nothing there !!!!

Any suggestions?

Thanks very Much
Charlie

 

You're using the Corp version. Do you have serial number that's going to
allow you to apply the SP?

Duane

 

Yes I do, mine is a Legitimate version and I "Think" I have all the
"Critical" Updates from the MS Site. I have SP1 and up till a few days ago,
all was well, then this started.

 

So, you actually applied the SP and critical updates and are having
problems after that? You may want to do an upgrade over the top of the
existing O/S it will not destroy anything to see if that corrects the
problem. You'll have to apply the SP and updates again.

Duane