epson stylus 680 printer

Discussion in 'Computer Support' started by Atilio Stampone, Sep 22, 2004.

  1. Is there a work around for the their being no colour ink in the printer
    but only wanting a b+w printout with this model??
    It fails to print from the black when the colour ink has all been
    used,though plenty of black is available.
    very annoying problem.
    Thanks for any suggestions(other than "buy coloured ink)!!

    ;-)

    --
     
    Atilio Stampone, Sep 22, 2004
    #1
    1. Advertisements

  2. Atilio Stampone

    Jerry G. Guest

    When your printer does not see a colour cartridge, it goes in to an
    error mode. Leave the colour cartridge in the printer, and use it as a
    B&W and you should be okay.

    In some models, you can go in to the printer properties setup, and tell
    the setup to only print in B&W. Some of these printers will allow the
    removal of the colour cartridge when in the B&W mode, while many others
    will not.

    --

    Jerry G.
    ======

    Is there a work around for the their being no colour ink in the printer
    but only wanting a b+w printout with this model??
    It fails to print from the black when the colour ink has all been
    used,though plenty of black is available.
    very annoying problem.
    Thanks for any suggestions(other than "buy coloured ink)!!

    ;-)

    --
     
    Jerry G., Sep 22, 2004
    #2
    1. Advertisements

  3. Atilio Stampone

    Bob B Guest

    Bob B, Sep 22, 2004
    #3
  4. Javier Pascual Santiago Rodriguez Lopez De Rojos, Sep 22, 2004
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.