endpoint vpn router to endpoint vpn router problem

Discussion in 'Cisco' started by Mike Doty, Oct 2, 2004.

  1. Mike Doty

    Mike Doty Guest

    I have two linksys/cisco befsx41 routers on static ip addresses with vpn
    tunnel established, according to the vpn logs. Account names, log ons and
    domain names are the same on all three computers (two at the other end, one
    at this end). The local network at the other end is working correctly, I
    just can't see that end from here, or this end from there. Any suggestions?
    Mike Doty, Oct 2, 2004
    1. Advertisements

  2. Mike Doty

    sali Guest

    have you checked "gateway" address on computers?
    gateway is the router's ip [internal] address, one for each location.
    if you are using win os, try "ipconfig/all" at command prompt to check
    sali, Oct 2, 2004
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.