Dual line failover configuration w/Cisco routers?!?

Discussion in 'Cisco' started by Castravete, Mar 9, 2005.

  1. Castravete

    Castravete Guest

    Hi, folks,

    I have a quick question: I would like to configure a pair of routers
    (3640s, or 2840s - haven't decided yet), each one "terminating" a LAN,
    with a pair of T1 lines connecting them (the "WAN" part), in such a way
    that only specific traffic would be allowed on each T1, under normal
    conditions, but all the traffic will switch over to one line, in case of a
    failure of the other. Links to RTFCS (CS=CiscoSide) will be appreciated,
    as much as direct advise or configuration samples.

    TIA,
    C
     
    Castravete, Mar 9, 2005
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.