Draytek 2600V using extension cord

Discussion in 'VOIP' started by Harps, Jul 9, 2004.

  1. Harps

    Harps Guest

    Hi,

    I have a Vigor 2600V for to which I have 2 phones connected. Phone 1
    is located next to the router so is plugged in using the supplied
    adapter. This phone works fine.

    The 2nd phone is located some distance away, and so is running through
    an extension cable (which is plugged into the supplied adapter and
    then into the router). The problem is this phone doesn't work. I don't
    get a dial tone and it doesn't ring. If I use the same phone, but
    bypass the extension, it works fine. I have verified that the
    extension is working by plugging it into a normal phoneline and it is
    fine.

    Is this an impedance problem or something? Can it be resolved?

    Thanks in advance.
     
    Harps, Jul 9, 2004
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.