Deploying Cisco VPN Client with Group Policy

Discussion in 'Cisco' started by K.J. 44, Nov 13, 2006.

  1. K.J. 44

    K.J. 44 Guest


    I am not sure if I should put this in the Windows forum since i am
    deploying with group policy or if it should go here because my question
    has to do with the VPN Client.

    Here is my question and I apologize if I posted in the wrong spot.

    I am deploying the Cisc VPN Client 4.6 to a bunch of PCs using group
    policy. Is there a way to specify parameters so I do not have to go
    around and put in the information to each of these? (IP address,
    group-name, etc.)

    K.J. 44, Nov 13, 2006
    1. Advertisements

  2. K.J. 44

    RC Guest

    Create the .pcf (configuration file) and put it in the same directory with
    the VPN client install files. It will be magically imported during the VPN
    client installation.

    I've only done this with the .exe, I can only assume it will work with the

    RC, Nov 13, 2006
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.