debug frame replay switch

Discussion in 'Cisco' started by dt1649651, Jun 21, 2005.

  1. dt1649651

    dt1649651 Guest

    I use a Cisco 2522 as a frame relay switch. I can ping from router A to
    router B thru thru the serial interface with encapsulation frame-relay,
    but I am not sure if those pings really go thru the FR switch or not.

    I use the command debug frame-relay packet on the FR switch but there
    is nothing displayed when I ping from router to router.

    Do I use the wrong command ( I hope so, otherwise my router settings
    are wrong and the packets really not go thru the FR switch ) ?

    Thanks for any advice,

    DT
     
    dt1649651, Jun 21, 2005
    #1
    1. Advertisements

  2. dt1649651

    csouth Guest

    csouth, Jun 22, 2005
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.