Dead Cicso Catalyst WS-C2924-XL-EN

Discussion in 'Cisco' started by Tobias Giner, May 26, 2004.

  1. Tobias Giner

    Tobias Giner Guest

    I have a Catalyst 2900XL Series here in front of me.
    The switch was unused for over a year.
    Now I plugged in the power cable but the switch is not booting. The
    system led is orange and all port leds are green. Expect the first
    port led, this led is orange.
    I can not connect via serial cable.
    What´s wrong here?

    Thank for your help.
     
    Tobias Giner, May 26, 2004
    #1

    1. Advertisements

  2. Tobias Giner

    MA Guest

    It's failed POST, a DRAM error I believe. Check your memory is seated
    correctly maybe?
     
    MA, May 26, 2004
    #2

    1. Advertisements

  3. Tobias Giner

    Tobias Giner Guest

    Unfortunately there is no possibility to remove the RAM. It´s all fixed on
    the plate.
     
    Tobias Giner, May 26, 2004
    #3

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. mrtg, snmp and cisco C2924 resets

  2. Cicso VPN using microsoft IAS (Radius)

  3. Management features in Cicso WiFi AP gear ?

  4. WS-C2924-XL-EN switch

  5. VOIP over VPN with cicso PIX series firewalls

  6. Hang internal network traffic on Cisco Catalyst C2924-XL.

  7. C2924 and Multiple VLANs

  8. Flashing lights on C2924-XL-EN

Loading...