deactivate wireless connection when LAN connection?

Discussion in 'Wireless Networking' started by Franz Schenk, Dec 22, 2006.

  1. Franz Schenk

    Franz Schenk Guest

    Have a problem on a customer site with a lot of Centrino Notebooks: Have
    configured WLL over GPO's (WPA with certificates). There is only the driver
    for the Wireless Card installed, no additional Software. The customer uses
    DNS reverse resolution for remote support and host printing.

    The problem is that when these notebooks are connected to the LAN over the
    onboard Ethernet NIC, the WLL connection is active as well and the notebooks
    have two active NIC's with two IP addresses as well, and problems with DNS
    reverse lookup arise.

    Does anyone knows a tool or a script that can automatically deactivate the
    wireless connection when a wired Ethernet connection is established?

    Thank you all in advance for any feedback!
    Franz
     
    Franz Schenk, Dec 22, 2006
    #1
    1. Advertisements

  2. Jack \(MVP-Networking\)., Dec 22, 2006
    #2
    1. Advertisements

  3. Franz Schenk

    Guest Guest

    The new Lenovo "Access Connections" software has this feature.
    It can automatically turn wi-fi off when a LAN connection is detected.
    Not sure it will run on non-Lenovo PCs though.

    Regards,
    --PA
     
    Guest, Dec 24, 2006
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.