crypto map eigrp help

Discussion in 'Cisco' started by jcharth, Sep 12, 2005.

  1. jcharth

    jcharth Guest

    Hello I have a few question about crypto maps and eight. Do I have to
    put a deny statement at the end of the access-list for my crypto map?

    access-list 199 permit ip 10.1.10.0 0.0.0.255 10.1.11.0 0.0.0.255
    access-list 199 deny ip 10.1.10.0 0.0.0.255 any


    If i have several subents 10.1.10, 10.1.9, 10.1.8

    How do i know if eigrp is working in a full mesh configuration

    do i only need one statement on each router for this?

    network 10.1.0.0 0.0.255.255

    How do i know if eigrp is woking when i type show ip route 10.1.0.0
    i get subnet not in table but everything seems to be working

    thanks.
     
    jcharth, Sep 12, 2005
    #1
    1. Advertisements

  2. :Hello I have a few question about crypto maps and eight. Do I have to
    :put a deny statement at the end of the access-list for my crypto map?

    :access-list 199 permit ip 10.1.10.0 0.0.0.255 10.1.11.0 0.0.0.255
    :access-list 199 deny ip 10.1.10.0 0.0.0.255 any

    No, every crypto map ends with an implicit deny of everything else.
     
    Walter Roberson, Sep 12, 2005
    #2
    1. Advertisements

  3. |In article <>,
    |:Hello I have a few question about crypto maps and eight. Do I have to
    |:put a deny statement at the end of the access-list for my crypto map?

    |:access-list 199 permit ip 10.1.10.0 0.0.0.255 10.1.11.0 0.0.0.255
    |:access-list 199 deny ip 10.1.10.0 0.0.0.255 any

    |No, every crypto map ends with an implicit deny of everything else.

    Minor correction: every access-list ends with an implicity deny of
    everything else. Crypto maps are irrelevant to the question.
     
    Walter Roberson, Sep 12, 2005
    #3
  4. jcharth

    jcharth Guest

    Thanks for information
    I tried removing the deny statements from access-lists

    I remove my crypto map from the interface
    no crypto map mymap
    then i remove the deny statement from the access-list
    and when i put the crypto map back without the deny statement the
    router froze, I am glad it reloaded automatically. Can anyone tell me
    why this happened?
    thanks
     
    jcharth, Sep 12, 2005
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.