Connection timeout?

Discussion in 'Cisco' started by David Hodgson, Feb 25, 2004.

  1. Hi folks,

    I have...

    Server
    193.195.10.2
    |
    SWITCH
    |
    193.195.10.1 outside
    PIX 501
    192.168.10.3 inside
    |
    |
    SWITCH (DMZ)---------192.168.10.2 Server
    |
    |
    192.168.10.1 outside
    PIX 501
    192.168.0.0 inside
    |
    SWITCH (INTERNAL)
    |
    192.168.0.10
    Server

    all routing is correct

    Now the problem is this...

    if I try to ping from 192.168.10.2 to 192.168.0.10 it times out
    if I then ping from 192.168.0.10 to 192.168.10.2 it works
    then if I ping from 192.168.10.2 to 192.168.0.10 it works. If I reboot
    192.168.10.2 it fails again until I ping it from 192.168.0.10.

    if I try to ping from 193.195.10.2 to 192.168.0.10 it times out
    if I then ping from 192.168.0.10 to 193.195.10.2 it works
    then if I ping from 193.195.10.2 to 192.168.0.10 it works. If I reboot
    193.195.10.2 it fails again until I ping it from 192.168.0.10.

    can it be some sort of wierd timeout or arp on the PIX's when packets are
    coming from external

    thanks
    Dave
     
    David Hodgson, Feb 25, 2004
    #1
    1. Advertisements

  2. David Hodgson

    Dave Guest

    There is no NAT, and no limits to what can pas through the pix's

    any answers
    anyone.....

    Dave
     
    Dave, Feb 26, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.