Connection Problems Cisco Catalyst 4503 & Sunfire 240

Discussion in 'Cisco' started by Marco Decker, Feb 22, 2007.

  1. Marco Decker

    Marco Decker Guest

    Hello,

    i have a problem that the connection with a Sunfire 240 does not work on
    1 Gbit Speed. 10/100 Full/half is nor problem but if i change the server
    to 1Gbit the connection goes down.

    Has anyone and idea or maybe the same problem ?

    Regards
    Marco
     
    Marco Decker, Feb 22, 2007
    #1

    1. Advertisements

  2. Marco Decker

    chris Guest

    Maybe you've connected it to a 10/100 port?

    ;-)

    For GigE I think that you are supposed to leave it to negotiate, not hard
    set it. What does the port on the 4503 show?

    Chris.
     
    chris, Feb 22, 2007
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. how to configure spanning-tree for cisco 4503 & 2950 series

  2. Cat 4503 not receiving VTP info from 6513...

  3. cisco 4503 QoS for VoIP assistance request

  4. Problem logging on a Catalyst 4503

  5. 2 cisco catalyst 2900 connectec and 2 bridges connection.

  6. WTS Cisco Catalyst & Catalyst Express Switches

  7. catalyst 4503-e and 2960 CLI

  8. Cisco 4503 BGP gateway question

Loading...