Connecting to Pix vpn from behind pix

Discussion in 'Cisco' started by gomert, Jan 10, 2006.

  1. gomert

    gomert Guest

    I am having an issue connecting to a pix vpn from behind another pix
    using the cisco client. I get connected but am not able to pass any
    traffic.
     
    gomert, Jan 10, 2006
    #1
    1. Advertisements

  2. gomert

    Brian V Guest

    On the Pix you are connecting to issue the command "isakmp nat-traversal 20"
     
    Brian V, Jan 10, 2006
    #2
    1. Advertisements

  3. gomert

    Brian Guest

    If that doesn't work, then on the pix you are behind, allow esp (IP 50)
    inbound from the remote peer address. Don't know why, but I've had a
    couple issues recently that this fixed.
     
    Brian, Jan 11, 2006
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.