Connected to DSL PPPOE, Cant Ping from Outside Interface, Inside OK

Discussion in 'Cisco' started by Scott Townsend, Mar 26, 2005.

  1. I have a 1721 router with a WIC-1ENET card that I have connected to a DSL
    Modem. The WIC-1ENET port is configured with a Dialer to do the PPPoE. The
    Built in is hard coded IP.

    I then have a VPN connection back to HQ PIX.

    If I ping and source the port to the Built in I can ping just fine. If i
    ping without specifying a port it does not ping.

    This is a problem as I'm trying to save the Config to a TFTP Server on the
    other side of the VPN. I cant seem to source the TFTP Copy from the Internal
    port.

    Any Suggestions?


    Thanks,
    Scott<-
     
    Scott Townsend, Mar 26, 2005
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.