Configuring Cisco Secure ACS for Windows v3.2 With PEAP-MS-CHAPv2 Machine Authenticat

Discussion in 'Cisco' started by ruchi, May 9, 2006.

  1. ruchi

    ruchi

    Joined:
    May 9, 2006
    Messages:
    1
    Likes Received:
    0
    Hi All,

    I have been trying to configure Cisco Secure ACS for Windowsv3.2 with PEAP_MS_CHAPv2 Machine Authentication. I am able to install the certificate and configure PEAP Settings on the ACS. But when I try to Configure the Access Point as an AAA Client, ACS does not accept the AP information and gives the error " RADIUS key value must not be blank".

    I am providing all the information i.e. AAA Client Hostname, AAA Client IP Address, Key and am selecting RADIUS(Cisco Aironet) in the Authentication using field.

    I am using evaluation version of the ACS. Could this be the problem for the same or am I missing something else?

    Thanks,
    Ruchi
     
    ruchi, May 9, 2006
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.