Configuring Cisco 2821 with S/T modules in Malaysia PJ using ISDN BRIfrom Telekom Malaysia

Discussion in 'Cisco' started by roylmk, Dec 10, 2007.

  1. roylmk

    roylmk Guest

    Dear Experts,

    we are using Cisco 2821 installed with S/T BRI modules and DSP. We
    have subscribed to the ISDN BRI services from Telekom Malaysia. We
    would like to use the ISDN BRI to setup voice gateway to use Cisco IP
    telephony (Cisco IP phone 7941, cisco IP phone 7961 and Cisco 7936).

    Any experts kind enough to share what is the Telekom Malaysia's
    Exchange configuration to match with what we need to set in the
    router?

    Thanks
    Roy
     
    roylmk, Dec 10, 2007
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.