Configuring a console server with a WIC-1AM modem?

Discussion in 'Cisco' started by Bob, Nov 20, 2008.

  1. Bob

    Bob Guest

    I've installed a WIC-1AM module into a 2620XM router and wish to make
    it available only for dial-in so that I can reverse telnet out through
    other interfaces (console, etc.) for OOB management of my other Cisco
    devices. Getting to *this* router OOB is not important, which is why
    I chose the internal modem instead of hanging one off the AUX port. I
    don't expect both this router and all of my network to be down at the
    same time!

    What I can't find at CCO is a good config to use which enables me to
    dial into this router and get a CLI. I see configs for dial-out
    backup, PPP, etc but not something simple like this. And with all the
    old examples and different modemcap types, it's hard to discern
    exactly what I need.

    Does anyone have a good config example or can point me in the right
    direction?
     
    Bob, Nov 20, 2008
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.