Configure PIX 515E

Discussion in 'Cisco' started by arie01, Mar 3, 2010.

  1. arie01

    arie01

    Joined:
    Mar 3, 2010
    Messages:
    2
    Likes Received:
    0
    Hello there,

    I'm new to this newsgroup/forum/Cisco/firewalls and I need to configure PIX 515E from scratch to replace the ISA Server 2006 in our company. The ISA server is our proxy and it has just a few rules. In particular, we have two PCs in our LAN that need to be accessed using remote desktop from anywhere outside of our network. We replaced the default port 3389 with two other ports and configured two separate rules on the ISA Server and it works fine.

    As for the PIX, I manages to get SSH and PDM running. So I tried to add custom ports on the PDM interface but I couldn't find where to do that. I also need to block SQL traffic on ports TCP 1433, UDP 1434 to all but 2 or 3 IP addresses on our network. Could someone please help me get this going?

    Thank you,
    Arie
     
    arie01, Mar 3, 2010
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.