Conditional Debug doesn't work right, any ideas?

Discussion in 'Cisco' started by Cozzmo, Apr 13, 2012.

  1. Cozzmo

    Cozzmo Guest

    ----------
    Conditional Debug doesn't work right.
    I run the below commands on a cisco 7204VXR router.
    I would think I'd only log output for snmp entering the interface
    F0/0. However I see the requests from our server coming into the S1/0
    interface.

    What gives?

    ro-ip#debug condition interface FastEthernet0/0
    ro-ip#debug snmp pack
    ro-ip#debug snmp head

    ro-ip#sh debug cond
    Condition 1: interface Fa0/0 (1 flags triggered)
    Flags: Fa0/0


    Apr 13 09:30:51.874: SNMP: Packet received via UDP from x.x.x.x on
    Serial1/0
    Apr 13 09:30:51.874: SNMP: Get request, reqid 481849978, errstat 0,
    erridx 0
    sysUpTime.0 = NULL TYPE/VALUE
    Apr 13 09:30:51.938:
    Incoming SNMP packet
    Apr 13 09:30:51.938: v2c packet
    Apr 13 09:30:51.938: community string: xxxxx
    <snip>

    Thanks,
    Crzzy1.
    -------------
     
    Cozzmo, Apr 13, 2012
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.