Cisco WIC-1ADSL and SBC Yahoo DSL

Discussion in 'Cisco' started by Andrew Brown, Oct 30, 2003.

  1. Andrew Brown

    Andrew Brown Guest

    I currently have a DSL connection via SBC Yahoo DSL which uses a
    Netopia Cayman 3546 DSL router in bridging mode. I have a Cisco 3600
    series router with a WIC-1ADSL card, and I would like to plug the DSL
    line straight into the WIC-1ADSL and bypass the Cayman entirely. I
    have a set of static IPs and don't want to do any NAT'ing on the 3600.

    Does anyone have a similar setup working, and if so could you post a
    config? I have found several similar configs posted on web sites
    and/or Usenet, but they all revolve around DHCP or NAT and I haven't
    been able to successfully adapt them to our situation. I have managed
    to get the WIC-1ADSL up (line protocol up) and atm debug messages show
    that the WIC seems to be connecting to the DSLAM correctly, but we
    still have no connectivity.

    Thanks in advance for any help you can provide.


    Andy
     
    Andrew Brown, Oct 30, 2003
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.