Cisco VPN Client through PIX to a PIX

Discussion in 'Cisco' started by nordberg, Aug 11, 2004.

  1. nordberg

    nordberg Guest

    Hi,

    I have a weird problem that I will briefly describe and will post the
    configs up when I can get hold of them.

    Basically, I have a W2K machine running the Cisco VPN Client. This client is
    behind a PIX 501 running 6.3(1) software. This client connects to another
    3rd party PIX via the Cisco client. The connection works just fine. Connects
    immediately and all seems well. If I look in the details of the VPN client I
    can see the routing table specified by the remote PIX. However, whilst I can
    send data to the remote PIX without problem, it seems nothing is coming back
    in. Bytes received is zero and stays at zero. I was under the impression
    that once the VPN tunnel was in place, no filtering would occur; is this not
    the case? Can anyone give me any pointers to getting this working?

    TIA
    Matt
     
    nordberg, Aug 11, 2004
    #1

    1. Advertisements

  2. nordberg

    none Guest

    Try adding this command to PIX

    fixup protocol esp-ike

    This won't work if you have a VPN on the PIX also.
     
    none, Aug 11, 2004
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Help with Cisco VPN client 4.0.1 (and 4.0.3) - The VPN client could not find the adapters GUID

  2. PIX to PIX VPN and VPN Client to PIX Config Example?

  3. Cisco VPN client through PIX firewall

  4. PIX 501 VPN client to VPN client connections

  5. VPN PIX-_static PIX ; PIX-dynamic_PIX ; VPN Client

  6. MAC OS X using Cisco VPN Client through CISCO PIX 501

  7. Cisco VPN client OK - Checkpoint VPN client not OK

Loading...