cisco vpn client behind cisco PIX

Discussion in 'Cisco' started by netboy, Jul 10, 2003.

  1. netboy

    netboy Guest

    I have a server with cisco VPN client installed which is trying to
    connect to VPN concentrator through Cisco PIX firewall. When I have
    the client infront of the PIX I am able to connect to the VPN
    concentrator and then eventually to my servers behind the
    concentrator. This proved all the setup is right on my routers.
    However when I move the client behind the PIX, I do get the IPSEC
    session established with the concentrator but cannot connect to any
    servers behind the concentrator. I have tried one to one NAT for the
    client behind the firewall but it still does not work. Is there any
    access list I need for the clients public address to make this VPN
    connection work. My PIX version is 6.2.2 . Can somebody point me in
    the right direction.

    Tx in advance
    netboy, Jul 10, 2003
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.