Cisco VPN Client and statically assigned IP Address

Discussion in 'Cisco' started by mathias.gummert, Nov 26, 2008.

  1. mathias.gummert

    mathias.gummert Guest

    Hello there,

    i have several PCs connecting to a central site router using the VPN
    Client (5.0.01.0600) and different media (DSL, ISDN, UMTS).

    I would like the central router to assign the same IP address to the
    VPN clients each time they connect again to the central site.

    So far I have an IP pool configured on the central site router, but
    this assigns a different address each time a client connects.

    Thank´s for any suggestion.

    Mathias
     
    mathias.gummert, Nov 26, 2008
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Help with Cisco VPN client 4.0.1 (and 4.0.3) - The VPN client could not find the adapters GUID

  2. Watchguard / Safenet Client and Cisco VPN Client Compatible?

  3. USB Keys and Cisco VPN Concentrator / Cisco VPN Client ?

  4. PIX 501 VPN client to VPN client connections

  5. Multiple public IPs statically NAT'd to a single inside host

  6. Adding additional routes to a VPN client (PIX515E and Cisco client)

  7. Cisco VPN client OK - Checkpoint VPN client not OK

Loading...