cisco vlan tagging

Discussion in 'Cisco' started by ants, May 5, 2005.

  1. ants

    ants Guest

    how do i do this on cisco devices? is it possible?
    thanks in advance.

    need to tag vlan 600 below... or is it already tagged by default?

    interface GigabitEthernet0/24
    description WAN Connection
    switchport access vlan 600
    switchport mode access
    no ip address
    duplex full
    speed 100
    no mdix auto
    spanning-tree portfast
     
    ants, May 5, 2005
    #1
    1. Advertisements

  2. ants

    Delija Guest

    on router:
    Interface Range Configuration Mode

    encapsulation dot1q vlan-id [native]

    no encapsulation dot1q

    Subinterface Configuration Mode

    encapsulation dot1q vlan-id second-dot1q {any | vlan-id |
    vlan-id-vlan-id[,vlan-id-vlan-id]}

    no encapsulation dot1q vlan-id second-dot1q {any | vlan-id |
    vlan-id-vlan-id[,vlan-id-vlan-id]}
     
    Delija, May 5, 2005
    #2
    1. Advertisements

  3. ants

    Jonathan Guest

    VLANs are only tagged when they are not the native VLAN on a trunk.




    Jonathan
     
    Jonathan, May 5, 2005
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.