cisco t1 gw with many fxs endpoint - radius (radiator) -urgent help sorry

Discussion in 'Cisco' started by optimus, Apr 1, 2004.

  1. optimus

    optimus Guest

    ALL
    the cisco router gk + cisco 2600 t1 isdn gw + many fxs endpoint
    the radiator (radius) is acted as a CDR server

    using the radiator radacct.cgi cannot view the pstn (t1 gw) to fxs endpoint
    air time.
    but i can see the /var/log/radius/detail had detail on it, just the
    radacct.cgi cannot show up the detail??

    the radacct.cgi can show up the fxs call to pstn record clearly.

    what is the best view of the detail record?


    pls help

    !
    version 12.2
    service timestamps debug datetime msec localtime
    service timestamps log datetime msec localtime
    no service password-encryption

    !
    clock timezone hk 8
    voice-card 1
    !
    aaa new-model
    !
    !
    aaa authentication login default line
    aaa accounting connection h323 start-stop group radius
    aaa session-id common
    ip subnet-zero
    no ip source-route


    gw-accounting h323
    gw-accounting h323 vsa
    gw-accounting voip

    radius-server host xxxxxxxxxxxxxx auth-port 1645 acct-port 1646
    radius-server key mysecret
    radius-server authorization permit missing Service-Type
    radius-server vsa send accounting
    radius-server vsa send authentication
    call rsvp-sync
    !
    !
    this is one of the example of the pstn -> fxs record, but cannot find in
    http://localhost/cgi-bin/radacct.cgi


    Fri Apr 2 04:09:07 2004
    Acct-Session-Id = "000106F5"
    Called-Station-Id = "8136"
    cisco-h323-setup-time = "h323-setup-time=04:08:53.163 hk Fri Apr 2
    2004"
    cisco-h323-gw-id = "h323-gw-id=gw."
    cisco-h323-conf-id = "h323-conf-id=3B83727E 834F11D8 82FFE9A2
    3E914657"
    cisco-h323-call-origin = "h323-call-origin=answer"
    cisco-h323-call-type = "h323-call-type=Telephony"
    cisco-avpair = "h323-incoming-conf-id=3B83727E 834F11D8 82FFE9A2
    3E914657"
    cisco-avpair = "subscriber=RegularLine"
    cisco-avpair = "gw-rxd-cdn=ton:0,npi:0,#:8136"
    cisco-avpair = "calling-party-category=9"
    cisco-avpair = "transmission-medium-req=2"
    cisco-avpair = "connect-progress=Call Up"
    Acct-Status-Type = Start
    NAS-Port-Type = Async
    Cisco-NAS-Port = "ISDN-VOICE:20"
    NAS-Port = 0
    Service-Type = Login-User
    NAS-IP-Address = xxxxxxxxx.218
    Acct-Delay-Time = 0
    Timestamp = 1080850147

    Fri Apr 2 04:09:07 2004
    Acct-Session-Id = "000106F6"
    Called-Station-Id = "8136"
    cisco-h323-setup-time = "h323-setup-time=04:08:53.195 hk Fri Apr 2
    2004"
    cisco-h323-gw-id = "h323-gw-id=gw."
    cisco-h323-conf-id = "h323-conf-id=3B83727E 834F11D8 82FFE9A2
    3E914657"
    cisco-h323-call-origin = "h323-call-origin=originate"
    cisco-h323-call-type = "h323-call-type=VoIP"
    cisco-avpair = "h323-incoming-conf-id=3B83727E 834F11D8 82FFE9A2
    3E914657"
    cisco-avpair = "subscriber=RegularLine"
    cisco-avpair = "session-protocol=cisco"
    cisco-avpair = "gw-rxd-cdn=ton:0,npi:0,#:8136"
    cisco-avpair = "connect-progress=Call Up"
    Acct-Status-Type = Start
    Service-Type = Login-User
    NAS-IP-Address = xxxxxxxxxxx.218
    Acct-Delay-Time = 0
    Timestamp = 1080850147

    Fri Apr 2 04:09:40 2004
    Acct-Session-Id = "000106F5"
    Called-Station-Id = "8136"
    cisco-h323-setup-time = "h323-setup-time=04:08:53.163 hk Fri Apr 2
    2004"
    cisco-h323-gw-id = "h323-gw-id=gw."
    cisco-h323-conf-id = "h323-conf-id=3B83727E 834F11D8 82FFE9A2
    3E914657"
    cisco-h323-call-origin = "h323-call-origin=answer"
    cisco-h323-call-type = "h323-call-type=Telephony"
    cisco-avpair = "h323-incoming-conf-id=3B83727E 834F11D8 82FFE9A2
    3E914657"

    cisco-avpair = "subscriber=RegularLine"
    cisco-avpair = "gw-rxd-cdn=ton:0,npi:0,#:8136"
    cisco-avpair = "calling-party-category=9"
    cisco-avpair = "transmission-medium-req=2"
    cisco-h323-connect-time = "h323-connect-time=04:09:01.140 hk Fri Apr
    2 2004"
    Acct-Input-Octets = 3765
    Acct-Output-Octets = 24400
    Acct-Input-Packets = 381
    Acct-Output-Packets = 1220
    Acct-Session-Time = 25
    cisco-h323-disconnect-time = "h323-disconnect-time=04:09:25.937 hk
    Fri Apr 2 2004"
    cisco-h323-disconnect-cause = "h323-disconnect-cause=10"
    cisco-avpair = "h323-ivr-out=Tariff:Unknown"
    cisco-avpair = "release-source=1"
    cisco-h323-voice-quality = "h323-voice-quality=0"
    Acct-Status-Type = Stop
    NAS-Port-Type = Async
    Cisco-NAS-Port = "ISDN-VOICE:20"
    NAS-Port = 0
    Called-Station-Id = "8136"
    Service-Type = Login-User
    NAS-IP-Address = xxxxxxxxxxx.218
    Acct-Delay-Time = 0
    Timestamp = 1080850180

    Fri Apr 2 04:09:42 2004
    Acct-Session-Id = "000106F6"

    Called-Station-Id = "8136"
    cisco-h323-setup-time = "h323-setup-time=04:08:53.195 hk Fri Apr 2
    2004"
    cisco-h323-gw-id = "h323-gw-id=gw."
    cisco-h323-conf-id = "h323-conf-id=3B83727E 834F11D8 82FFE9A2
    3E914657"
    cisco-h323-call-origin = "h323-call-origin=originate"
    cisco-h323-call-type = "h323-call-type=VoIP"
    cisco-avpair = "h323-incoming-conf-id=3B83727E 834F11D8 82FFE9A2
    3E914657"
    cisco-avpair = "subscriber=RegularLine"
    cisco-avpair = "session-protocol=cisco"
    cisco-avpair = "gw-rxd-cdn=ton:0,npi:0,#:8136"
    cisco-h323-connect-time = "h323-connect-time=04:09:01.128 hk Fri Apr
    2 2004"
    Acct-Input-Octets = 24540
    Acct-Output-Octets = 3295
    Acct-Input-Packets = 1227
    Acct-Output-Packets = 334
    Acct-Session-Time = 27
    cisco-h323-disconnect-time = "h323-disconnect-time=04:09:27.928 hk
    Fri Apr 2 2004"
    cisco-h323-disconnect-cause = "h323-disconnect-cause=10"
    cisco-h323-remote-address = "h323-remote-address=xxxxxxxxxxx.237"
    cisco-avpair = "release-source=1"
    cisco-h323-voice-quality = "h323-voice-quality=11"
    cisco-avpair = "alert-timepoint=04:08:53.802 hk Fri Apr 2 2004"
    cisco-avpair = "remote-media-address=xxxxxxxxxxx.237"
    cisco-avpair = "outgoing-area=gk.com"
    cisco-avpair = "gw-final-xlated-cdn=ton:0,npi:0,#:8136"
    Acct-Status-Type = Stop
    Service-Type = Login-User
    NAS-IP-Address = xxxxxxxxxxx.218
    Acct-Delay-Time = 0
    Timestamp = 1080850182
     
    optimus, Apr 1, 2004
    #1
    1. Advertisements

  2. optimus

    optimus Guest

    ## one more remark
    May be there is no user name on the cisco gw , so that no identification for
    this.

    How can I add a user name for this?
     
    optimus, Apr 1, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.