Cisco BRI connection to An Ascend p 50

Discussion in 'Cisco' started by Jim Gonzalez, Feb 11, 2004.

  1. Jim Gonzalez

    Jim Gonzalez Guest

    Hello,
    I have a Cisco 3640 router with NM8-U isdn card connected to a
    Ascend/ Lucent pipe 50. I can not bring up the second channel. From
    the Cisco console logs it seems that the second channel is connecting
    but is immediately disconnected . I am wondering if there is anyone
    that has successfully connect 2 B channels ? Here is my debug and
    config


    4d10h: %LINK-3-UPDOWN: Interface BRI1/0:2, changed state to up
    4d10h: %ISDN-6-CONNECT: Interface BRI1/0:2 is now connected to
    4106870954
    4d10h: %LINK-3-UPDOWN: Interface BRI1/0:2, changed state to down
    4d10h: %ISDN-6-CONNECT: Interface BRI1/0:1 is now connected to
    4106870953 00c0.7ba3.5b15
    4d10h: Vi1: MLP: Bundle has 1/2 desired links, requesting another
    4d10h: Vi1: MLP: Bundle has 1/2 desired links, requesting another
     
    Jim Gonzalez, Feb 11, 2004
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.