Cisco AP1200 broadcast issue

Discussion in 'Cisco' started by dovelet, Jun 16, 2004.

  1. dovelet

    dovelet Guest

    Hi all,

    I am using Cisco Access Point 1200 and I found some problems and I
    hope someone can help me.

    With using the AiroPeek, although I disabled the broadcast key
    rotation, the AiroPeek still found that the AP1200 send out "Ethernet
    Broadcast" continuouly using the radio interface. Is it normal? For
    security reason, is it possible to disable the broadcast? Thanks.

    Regards,
    Dovelet
     
    dovelet, Jun 16, 2004
    #1

    1. Advertisements

  2. dovelet

    mh Guest

    There are a number of different broadcasts that the AP 1200 can be
    sending out

    For example ARP request are sent using an Ethernet broadcast address.

    NETBIOS broadcasts, etc, etc

    Things to consider:
    a) disable CDP on readio interface
    b) consider enabling dot11 arp-cache (should have latest release of
    AP 1200 IOS to vaoid any issues
    c) consider eliminating NETBIOS over wireless (looks at SMB direct
    over TCP/IP as an alternative)

    Send me private email and I can discuss further if you wish.
     
    mh, Jun 16, 2004
    #2

    1. Advertisements

  3. dovelet

    mh Guest

    Please resend you email and attachments; I had problems with my email
     
    mh, Jun 18, 2004
    #3

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. MAC authentication on AP1200

  2. Cisco AP1200 core dump

  3. Cisco AP1200 no clients association

  4. Cisco AP1200 problems! All clients looses ip.

  5. Cisco AP1200 MIBs

  6. cisco Aironet Ap1200

  7. Broadcast Issue due to LAG?

  8. Cisco AP1200 Network Interface Radio0-802.11G does not coming up

Loading...