Cisco AP VLan issue - Ping not working

Discussion in 'Cisco' started by yoar_ind, Aug 27, 2007.

  1. yoar_ind


    Aug 27, 2007
    Likes Received:

    I am using Cisco AP 1200 seriies and configured 3 VLANs as follows

    SSID VLANID NATiVE VLAN GuEST Mode Broad coast Beacons
    ----- ------ ----------- ---------- -------------------
    CCX1 1 No No No
    CCX2 2 No No No
    CCX3 3 Yes Yes Yes

    I have assigned static IP to the Client.
    Authentication is open and no encyption is used.
    Cisco IP address is
    Client Ip address is

    I connected the Client to the CCX2. Association is working but ping is not working.

    If I change the CCX2 as the native VLan then ping is working.

    If CCX3 is native Vlan and If the client client connected to CCX2, why ping is not working.
    Did I forgot anything to configure?
    Does I need to change some modifications in the client to make the ping work?
    Does the AP advertize any VLan information to the client

    Please any advice is great help for me

    yoar_ind, Aug 27, 2007
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.