Cisco 857W and Netgear WG311v2 adapter

Discussion in 'Hardware' started by os4mike, Jan 9, 2008.

  1. os4mike

    os4mike

    Joined:
    Jan 4, 2008
    Messages:
    4
    Likes Received:
    0
    Hi,
    I have a problem whereby my Netgear Wireless PCI adapter drops out after about a day or so of operation after inital configuration of my Cisco 857w wireless router. (config appears ok with PPPoE)

    After a reboot of the PC and the Router, my Netgear application will see my network in the available list of networks, but will never connect again until I wipe the router, reload my script and restart the PC. I am running version 2.0.0.7 of the PCI card's firmware (latest) but still cannot solve this problem.

    I have a Centrino Laptop with 802.11b capability that always connects with no problems. The Netgear adapter has both the .11b .11g capabilities check-boxes ticked and will connect, however the connection will just not stay. Even after the PC drops out doing a- 'shut', 'no shut' on the routers dotradio 0,and atm 0 interfaces does not solve the problem. If I erase the config and dump it on again fresh, it works fine....for a while.
    Lastly I also notice that the netgear wireless tool that configures wireless (not windows) on my computer seems to show different channels as I turn on/ turn off my laptop from Channel 4(B) to 4(G). I am connected via WPA-PSK.


    Please help.
    Mike
     
    os4mike, Jan 9, 2008
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.